2025 MWFA Car CLASS

MWFA Compact cars

1. Any 1980 and newer 2 wheel drive compact van/truck/suv.

2. All vehicles must be stripped of all plastic, glass, headlights, and anything else that could fall off during the show.

3. All vehicles must remain stock, ABSOLUTLY NO WELDING ANYWHERE

4. Bumpers must remain stock, do not alter bumper in anyway. Factory bumper shocks must remain in the factory location. You may remove rear bumpers and shocks. There is to be no welding to be done to bumpers.

5. Batteries may be left in stock location and spray foam may be added around battery. You may also move the battery to passenger floor or seat. Battery must be secure.

6. If the factory gas tank is located in front of rear axle, you may leave it there. If it’s behind the axle, you must move it to the rear seat area. Factory tanks may be moved inside but must be secured.

7. All doors may be wired or chained in 6 places max per seam.

8. Trunks, hoods, tailgates all may be wired in 6 places total. Sheet metal to sheet metal only. Nothing to the frame or bumpers. If you remove trunk or tailgate you lose that wire or chain.

9. Rear seat bar may be added. It may have a plate welded to post. If you have to add something to get it away from the seat, please call. This is only to stop the sides from coming in, not to help any other part of the vehicle.

10. Drivers door must have a plate or bar welded or bolted in place for the drivers protection. You may have a passenger door bar Running from rear seat bar to door piller. These bars may not weld to the floor.

11. DOT tires only! Stock Wheels only. All wheel weights must be removed. Only tubes and air are permitted inside tires.

Rick Hollingshead

260-330-3249